Online Goodway catalogs
Online Catalog
Skype us
Facebook
Goodway Check out more products from "Scalebreak Chemicals" category!
     www.goodway-europe.eu

Scalebreaker SR (ASR)

Description
Descaling crystals for limescale deposits
Safe to handle and store, but a strong acid when dissolved in water. Non fuming.

Safe to use with:
- steel,
- stainless steel,
- cast iron,
- copper brass,
- aluminium,
- PVC,
- polythene,
- propylene,
- and most plastics / rubbers. (Test before use)
Dissolves up to 50% of its own weight of scale.

Available packagings:
- 2,5 kg pail - case of 6 x 2,5 kg pails
- 15 kg pail
- 50 kg drum
Specifications
Packaging (PCS/Unit): 2.5 kg, 15 kg, 50 kg
Comment: Non flammable and non volatile
Max temp (°C): 70
Solubility in water at 20°C: 22 grams/liter
Usage rate: 25-150 grams per litre water. Dissolves faster in hot water
Density at 20°C: ca. 1.3 g/ml
pH at 10% solution: <0.5
Appearance: Orange / pink crystals
Odour: Very slightly sulphurous
To be used with
Scalebreaker C210 Titan (CDP210)
Recirculating Acid pump C92 (GDS-C92)
Scalebreaker C90 (CDP090)
Scalebreaker C40S (CDP040S)
Recirculating Acid pump C40 (GDS-C40)
ScaleBreaker C20 (CDP020)
Scalebreaker C15AFR (CDP015AFR)
Scale Removing System with Chemical Circulation (GDS-15A-PH)
Tech tips
Kamco descaling chemicals are comprehensively inhibited to prevent corrosion of equipment being descaled, and incorporate a red to yellow pH colour change to give a visual check on solution strength.

General usage and application notes
As a general guide, the rate at which deposits are dissolved increases withhigher solution temperatures. Lower Scalebreaker use concentrations will require higher water temperatures for best effect.
The prepared solution may be used to soak the equipment to be descaled and cleaned, although the process is significantly faster when the solution is circulated vigorously by means of a suitable pump, such as Scalebreaker tank mounted pumps.
When limescale is being dissolved, carbon dioxide gas is evolved, and may cause foaming, dependent on the amount of scale present. Allowance should be made for the volume of foam when descaling commences. Should this be a problem, add Foambreaker at the recommended dosage.
Descaling may be considered complete when there is no further evolution of carbon dioxide, seen as bubbling in the solution, or in the return hose to a pump, but the Scalebreaker solution is still pink. If deposits have not been completely removed, and yet the solution has changed colour to amber/yellow, either add further Scalebreaker, or repeat the cleaning process.
After the descaling operation, drain the Scalebreaker solution, neutralise with Neutralising Crystals, and dispose of safely. Rinse or flush the escaled equipment thoroughly with clean water.
CAUTION: Scalebreaker chemicals and their solutions are acidic, and therefore suitable protective clothing, gloves, and goggles, should be worn.
Refer to appropriate Material Safety Data Sheet before use. The MSDS is supplied with every delivery from your dealer, in EN or RO.

CAUTION: When descaling with any acid, there is a possibility of flammable hydrogen gas being evolved, and the working area should be well ventilated. Avoid smoking nearby, or any other means of ignition.

FEATURED PRODUCT

Tough on Deposits, Easy on Tubes
604
SpeedClean Flexible Shaft for 11,1 - 12,7 mm ID

Code: SC-TC-S02
Goodway's Just Venting HVAC Blog